Swinging arm pivot nut

[bones]

When dismantling my Eurosport frame, I was surprised to find that there didn't seem to be a nut to retain the pivot bolt! Now that I have the stuff back from the powder coaters I'd like to start reassembling, so this bit a bit crucial. Beer tokens etc, waiting

Regards

Mario

[CXDave]

The PO probably either wrecked it getting it out or didn't do it up as you need a special tool.

[bones]

No response so far, so I'm wondering whether anyone has one I could borrow so I could get it measured up and get a replacement made up.

Regards

Mario

[Lozwho]

If it's the same as a B I'd have one Mario.... a brief rummage tomorow night and I can post down wednesday if it is. Just let me know.

[CXDave]

Euro one is different unfortunately. It is common to all the 3-tube frames but is also discontinued.

I am wondering if it would be easy to machine them?

[bones]

If it's the same as a B I'd have one Mario.... a brief rummage tomorow night and I can post down wednesday if it is. Just let me know.

Thanks, Loz, but as Dave says, they're not the same.

Regards

Mario

[gunna trev]

mario if its the same has a gl650 i can lend you one so you can get one made

[bones]

mario if its the same has a gl650 i can lend you one so you can get one made

Hi Trev

According to Partsfinder, it's the same part number, so, yes please. I'll get it measured up and get a quote for getting one made up. I'll PM you my details.

Thanks for your help.

Mario

[gunna trev]

no prob i will send it on thursday has i am on days tues+weds

[CXDave]

The internal thread is about 20mm and very fine.